With Scorpion Tool Components we strive to make it easy. The STC-0028-PointExtrema calculates the extremal point based on three or more points. This is needed to perform sub-pixel width measurement in the sample below. How we solve to locate the outer-most points: Locate the six objects with TemplateFinder3 Locate edge points with SingleLineFinder Use STC-0028-PointExtrema [...]
Filed under: General, Industrial Automation, Scorpion 9, Scorpion Vision Software | Leave a Comment »
With Scorpion Tool Components we strive to make useful things easy. The STC-0025 PolygonExtrema is such an operation. Find the extremal points from a polygon. To use STC-0025 is easy – it is a Scorpion Tool Component It will be available will Scorpion Vision 9.3
Filed under: General, Industrial Automation, Machine Vision, Scorpion 9, Scorpion Vision Software | Leave a Comment »
In the upcoming Scorpion Vision 9.3 – Image Stitching is just defining another image – no scripting or programming required The resulting image – the number is labelled 1, 2 and 3, looks like this:
Filed under: General, Industrial Automation, Scorpion 9, Scorpion Vision Software, Smart Camera | Leave a Comment »
Another Article by Vision System Design describing a very nice Scorpion Vision Can Code Reading system. http://online.qmags.com/VSD Read more : beer-can-print-verification
Filed under: Industrial Automation, Scorpion 9, Scorpion Vision Apps, Scorpion Vision Software | Leave a Comment »
The machine is so fast that no manufacturer can follow It is demonstrated at Polytec’s booth at the Control Show in Stuttgart and is a impressive setup.
Filed under: Machine Vision, Scorpion 9, Scorpion Vision Software | Leave a Comment »
Adapting to Windows-7 and especially 64-bit is quite a process primarily due to driver support but times are slowly changing to the better. With Scorpion 9.2 we can now report the following verified status: Complete firewire support for Windows-7 32 and 64 bit Unibrain’s generic ubCore driver support all firewire camera through Scorpion Firegrab camera [...]
Filed under: Machine Vision, Scorpion 9, Scorpion Vision 3D, Scorpion Vision Software | Leave a Comment »
The fine surface classification is being used for new machine vision areas. The screen shot below is from a system that sorts granite into Class 1, Class 2 or Reject. The system is working together with a robot to implement a complete solution.
Filed under: General, Machine Vision, Scorpion 9, Scorpion Vision Software, Tordivel Solutions | Tagged: contamination detection | Leave a Comment »
With the techniques shown in “3D in 2D Images – Part III“ we have the ability to create the 3D pose of any object represented by a 2D polygon – we can call it PolygonMatch3D based on the very powerful Scorpion Vision Software tool PolygonMatch which locates any occluded polygon with sub-pixel accuracy in 2D In [...]
Filed under: Machine Vision, Scorpion 9, Scorpion Vision 3D, Scorpion Vision Software, Smart Camera | Tagged: 3D Machine Vision | Leave a Comment »
We are proud to add Spanish language support to supplememt Norwegian, English and German with Scorpion Vision Software 9.2.
Filed under: Scorpion 9, Scorpion Vision Software | Leave a Comment »
We are continously working to improve Scorpion Vision Software with valuable features. One feature worth to mention is CylinderMonoPose3D – locate a cylinder with a single camera. The setup dialog contains the following properties: 3D camera calibration The diameter of the cylinder The two edge lines of the cylinder What can we do? How valuable [...]
Filed under: Scorpion 9, Scorpion Mono Stinger, Scorpion Vision 3D, Scorpion Vision Apps, Scorpion Vision Software, Smart Camera | Tagged: 3D Machine Vision | Leave a Comment »
Thor
Dagrun
Paul
